? asctb383e 201704-t ordering information types 1. standard type (without manual switch) *reverse polarity type available. (1 coil latching type: adjh220**, 2 coil latching type: adjh240**) suitable for lighting and motor load, 1 form a 50a latching relays dj-h relays (adjh) contact arrangement rated voltage part no. standard packing 1 coil latching type 2 coil latching type carton case 1 form a 5v dc ADJH21005 adjh23005 50 pcs. 200 pcs. 12v dc adjh21012 adjh23012 24v dc adjh21024 adjh23024 mm inch protective construction: flux-resistant type 39.0 39.0 15.0 15.0 30.2 30.2 1.535 1.535 .591 .591 1.189 1.189 standard type manual switch type rohs compliant features 1. high inrush capability ?tungsten load (tv-20 class) ?electronic ballast load (nema410) ?capacitive load (iec60669-1) 2. supports manual operation ?manual switch type available typical applications 1. smart house (shutter and sunblind control) 2. lighting control new adjh 2 operating function 1: 1 coil latching 2: 1 coil latching (reverse polarity) 3: 2 coil latching 4: 2 coil latching (reverse polarity) type classification 0: standard type (without manual switch) 1: manual switch type rated voltage (dc) 05: 5v, 12: 12v, 24: 24v contact arrangement 2: 1 form a
dj-h (adjh2) ? asctb383e 201704-t 2. manual switch type *reverse polarity type available. (1 coil latching type: adjh221**, 2 coil latching type: adjh241**) rating 1. coil data 1) 1 coil latching type *1. square, pulse drive 2) 2 coil latching type *1. square, pulse drive 2. speci?ations notes: *1. minimum switching load is a guide to the lower current limit of switching under the micro-load. this parameter is chan ged by the condition, such as switching times, environment condition, and expected reliability. when the relay is used lower than minimum switching load, reliability is attri tion. please use the relay over minimum switching load. *2. wave is standard shock voltage of 1.2 50 s according to jec-212-1981 *3. allowable range when in original packaging is ?0 to +70 c ?0 to +158 f . 3. expected electrical life contact arrangement rated voltage part no. standard packing 1 coil latching type 2 coil latching type carton case 1 form a 5v dc adjh21105 adjh23105 50 pcs. 200 pcs. 12v dc adjh21112 adjh23112 24v dc adjh21124 adjh23124 rated voltage set voltage (at 20 c 68 f )* 1 reset voltage (at 20 c 68 f )* 1 rated operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) rated operating power max. allowable voltage (at 20 c 68 f ) set coil reset coil set coil reset coil 5v dc max. 75% or less of rated voltage (initial) max. 75% or less of rated voltage (initial) 200ma 200ma 25 25 1,000mw 130% of rated voltage 12v dc 83.3ma 83.3ma 144 144 24v dc 41.7ma 41.7ma 576 576 rated voltage set voltage (at 20 c 68 f )* 1 reset voltage (at 20 c 68 f )* 1 rated operating current [ 10%] (at 20 c 68 f ) coil resistance [ 10%] (at 20 c 68 f ) rated operating power max. allowable voltage (at 20 c 68 f ) set coil reset coil set coil reset coil 5v dc max. 75% or less of rated voltage (initial) max. 75% or less of rated voltage (initial) 400ma 400ma 12.5 12.5 2,000mw 130% of rated voltage 12v dc 166.7ma 166.7ma 72 72 24v dc 83.3ma 83.3ma 288 288 characteristics item speci?ations contact data arrangement 1 form a contact resistance (initial) max. 20 m (by voltage drop 24 v dc 1a) contact material agsno 2 type contact rating (resistive) 50a 277v ac max. switching power (resistive) 13,850 va (50a 277v ac) max. switching voltage 480v ac max. switching current 50a (ac) min. switching load (reference value)* 1 100ma 5 v dc insulation resistance (initial) min. 1,000m (at 500v dc) measured portion is the same as the case of dielectric voltage dielectric strength (initial) between open contacts 1,500 vrms for 1min. (detection current: 10ma) between contact and coil 4,000 vrms for 1min. (detection current: 10ma) surge withstand voltage* 2 (initial) between contact and coil 12,000 v set time (initial) max. 20ms (at rated voltage, at 20 c 68 f , without bounce) reset time (initial) max. 20ms (at rated voltage, at 20 c 68 f , without bounce) shock resistance functional 100 m/s 2 (half-sine shock pulse: 11 ms, detection time: 10 s) destructive 1,000 m/s 2 (half-sine shock pulse: 6 ms) vibration resistance functional 10 to 55 hz at double amplitude of 1.5 mm (detection time: 10 s) destructive 10 to 55 hz at double amplitude of 2.0 mm expected life mechanical min. 1 10 6 (at 180 times/min.) conditions conditions for operation, transport and storage* 3 ambient temperature: ?0 to +85 c ?0 to +185 f humidity: 5 to 85% r.h. (not freezing and condensing at low temperature) unit weight approx. 31 g 1.09 oz type load switching capacity number of operations 1 form a resistive 50a 277v ac min. 1 10 4 (on:off = 1s:9s) 25a 277v ac min. 1 10 5 (on:off = 1s:9s) inrush load tungsten 2,400w 120v ac min. 2.5 10 4 (on:off = 1s:59s) electronic ballast 20a 277v ac min. 6 10 3 (on:off = 1s:9s) capacitive (iec 60669-1) 20a 250v ac 200 f min. 3 10 4 (on:off = 1s:9s)
dj-h (adjh2) e3e asctb383e 201704-t 4. inrush load (electrical life diagram) load tungsten electronic ballast capacitive (iec 60669-1) switching capacity 2,400w 120v ac 20a 277v ac 20a 250v ac 200 f load voltage 120v ac (60hz) 277v ac (60hz) 250v ac (60hz) load current inrush 250a o-p steady-state 20arms inrush 480a o-p steady-state 16arms inrush 400a o-p steady-state 20arms circuit current waveform 120v ac 60hz rated voltage g l1 relay 277v ac 60hz rated voltage g 1250 f relay 250v ac 60hz rated voltage g 0.25 200 f relay
dj-h (adjh2) ? asctb383e 201704-t dimensions (mm inch ) 1. standard type (without manual switch) 2. manual switch type safety standards ul/c-ul (recognized) vde file no. contact rating cycles temperature file no. contact rating cycles temperature e43149 50a 277v ac resistive 10 4 85 c 185 f 40045659 50a 250v ac (cos =1.0) 10 4 85 c 185 f 40a 347v ac resistive 2 10 4 40 c 104 f 30a 480v ac resistive 2 10 4 40 c 104 f 20a 347v ac electronic ballast (1 coil latching type only) 6 10 3 25a 250v ac (cos =1.0) 9 10 4 40 c 104 f 20a 277v ac electronic ballast 6 10 3 85 c 185 f 20a 277v ac standard ballast 3 10 4 85 c 185 f 20a 250v ac capacitor 200 f (iec60669-1 compliant) 5 10 3 40 c 104 f 15a 347v ac standard ballast 3 10 4 85 c 185 f 5,540w 277v ac tungsten 2.5 10 4 40 c 104 f mark can be downloaded from: http://industrial.panasonic.com/ac/e/ the cad data of the products with a external dimensions 15.0 39.0 27.5 6.75 1.85 0.4 30.2 5.0 7.5 2 coil latching type only 5.0 5.0 2 or 3- 0.64 1.5 1.5 1.535 1.083 .266 .073 .295 2 or 3- .025 .059 .059 1.6 1.6 2 coil latching type only + 0.5 ? 0.3 .591 .016 1.189 .197 .197 .197 .063 .063 + .020 ? .012 general tolerance: 0.3 .012 pc board pattern (bottom view) tolerance: 0.1 .004 schematic (bottom view) 27.5 6.75 1.083 .266 2 or 3-1.2 dia. 2 or 3-.047 dia. 2-2.8 dia. 2-.110 dia. 2 coil latching type only 7.5 .295 5.0 .197 5.0 .197 1 coil latching type 1 coil latching type (reverse polarity) 2 coil latching type 2 coil latching type (reverse polarity) 5( + ) 2( ? ) 1( ? ) 3 4 4 3 1( ? ) 2( + ) 2( ? ) 5( + ) 3 4 1( ? ) 4 2( ? ) 3 1( + ) external dimensions 5.8 5.3 13.6 15.0 39.0 27.5 6.75 1.85 max. 3.1 0.4 30.2 7.5 5.0 5.0 2 or 3- 0.64 1.5 1.5 .228 .535 1.535 1.083 .266 .073 .295 2 or 3- .025 .059 .059 1.6 1.6 5.0 + 0.5 ? 0.3 .209 .591 max. .122 .016 1.189 .197 .197 .063 .063 .197 + .020 ? .012 2 coil latching type only 2 coil latching type only general tolerance: 0.3 .012 pc board pattern (bottom view) tolerance: 0.1 .004 schematic (bottom view) 27.5 6.75 1.083 .266 2 or 3-1.2 dia. 2 or 3-.047 dia. 2-2.8 dia. 2-.110 dia. 2 coil latching type only 7.5 .295 5.0 .197 5.0 .197 1( + ) 3 2( ? ) 4 1( ? ) 4 3 5( + ) 2( ? ) 2( + ) 1( ? ) 3 4 4 3 1( ? ) 2( ? ) 5( + ) 1 coil latching type 1 coil latching type (reverse polarity) 2 coil latching type 2 coil latching type (reverse polarity)
dj-h (adjh2) ? asctb383e 201704-t insulation characteristics (iec61810-1) * actual value notes item characteristics clearance/creepage distance (iec61810-1) 9.5mm/12.7mm category of protection (iec61810-1) rt ii tracking resistance (iec60112) 175v insulation material group iii a over voltage category iii rated voltage 250 v pollution degree 2 type of insulation (between contact and coil) 4,000 v type of insulation (between open contacts) 1,500 v 1. for cautions for use, please read ?eneral application guidelines? 2. regarding the set/reset pulse time of the latching type relay, it is recommended to apply rated voltage for minimum 100ms pulse across the coil to secure the sure operation considering the ambient temperature and condition change through service life.
|
